docs: Rename comparator macros

Bluejay.asm

@@ -2252,7 +2252,7 @@ comp_check_timeout_extend_timeout:
 
 comp_check_timeout_not_timed_out:
 	inc	Comparator_Read_Cnt			; Increment comparator read count
-	Read_Comp_Out					; Read comparator output
+	Read_Comparator_Output
 	anl	A, #40h
 	cjne	A, B, comp_read_wrong
 
@@ -2448,7 +2448,7 @@ comm1_comm2:						; C->A
 	A_Com_Fet_On
 	Set_Pwm_C						; Reapply power after a demag cut
 	setb	IE_EA
-	Set_Comp_Phase_B
+	Set_Comparator_Phase_B
 	ret
 
 comm1_comm2_rev:					; A->C
@@ -2457,7 +2457,7 @@ comm1_comm2_rev:					; A->C
 	C_Com_Fet_On
 	Set_Pwm_A						; Reapply power after a demag cut
 	setb	IE_EA
-	Set_Comp_Phase_B
+	Set_Comparator_Phase_B
 	ret
 
 ; Comm phase 2 to comm phase 3
@@ -2469,7 +2469,7 @@ comm2_comm3:						; B->A
 	Set_Pwm_B
 	A_Com_Fet_On					; Reapply power after a demag cut (Necessary for EN/PWM driver)
 	setb	IE_EA
-	Set_Comp_Phase_C
+	Set_Comparator_Phase_C
 	ret
 
 comm2_comm3_rev:					; B->C
@@ -2478,7 +2478,7 @@ comm2_comm3_rev:					; B->C
 	Set_Pwm_B
 	C_Com_Fet_On					; Reapply power after a demag cut (Necessary for EN/PWM driver)
 	setb	IE_EA
-	Set_Comp_Phase_A
+	Set_Comparator_Phase_A
 	ret
 
 ; Comm phase 3 to comm phase 4
@@ -2490,7 +2490,7 @@ comm3_comm4:						; B->C
 	C_Com_Fet_On
 	Set_Pwm_B						; Reapply power after a demag cut
 	setb	IE_EA
-	Set_Comp_Phase_A
+	Set_Comparator_Phase_A
 	ret
 
 comm3_comm4_rev:					; B->A
@@ -2499,7 +2499,7 @@ comm3_comm4_rev:					; B->A
 	A_Com_Fet_On
 	Set_Pwm_B						; Reapply power after a demag cut
 	setb	IE_EA
-	Set_Comp_Phase_C
+	Set_Comparator_Phase_C
 	ret
 
 ; Comm phase 4 to comm phase 5
@@ -2511,7 +2511,7 @@ comm4_comm5:						; A->C
 	Set_Pwm_A
 	C_Com_Fet_On					; Reapply power after a demag cut (Necessary for EN/PWM driver)
 	setb	IE_EA
-	Set_Comp_Phase_B
+	Set_Comparator_Phase_B
 	ret
 
 comm4_comm5_rev:					; C->A
@@ -2520,7 +2520,7 @@ comm4_comm5_rev:					; C->A
 	Set_Pwm_C
 	A_Com_Fet_On					; Reapply power after a demag cut (Necessary for EN/PWM driver)
 	setb	IE_EA
-	Set_Comp_Phase_B
+	Set_Comparator_Phase_B
 	ret
 
 ; Comm phase 5 to comm phase 6
@@ -2532,7 +2532,7 @@ comm5_comm6:						; A->B
 	B_Com_Fet_On
 	Set_Pwm_A						; Reapply power after a demag cut
 	setb	IE_EA
-	Set_Comp_Phase_C
+	Set_Comparator_Phase_C
 	ret
 
 comm5_comm6_rev:					; C->B
@@ -2541,7 +2541,7 @@ comm5_comm6_rev:					; C->B
 	B_Com_Fet_On
 	Set_Pwm_C						; Reapply power after a demag cut
 	setb	IE_EA
-	Set_Comp_Phase_A
+	Set_Comparator_Phase_A
 	ret
 
 ; Comm phase 6 to comm phase 1
@@ -2553,7 +2553,7 @@ comm6_comm1:						; C->B
 	Set_Pwm_C
 	B_Com_Fet_On					; Reapply power after a demag cut (Necessary for EN/PWM driver)
 	setb	IE_EA
-	Set_Comp_Phase_A
+	Set_Comparator_Phase_A
 	ret
 
 comm6_comm1_rev:					; A->B
@@ -2562,7 +2562,7 @@ comm6_comm1_rev:					; A->B
 	Set_Pwm_A
 	B_Com_Fet_On					; Reapply power after a demag cut (Necessary for EN/PWM driver)
 	setb	IE_EA
-	Set_Comp_Phase_C
+	Set_Comparator_Phase_C
 	ret
 
 

Layouts/Base.inc

@@ -117,7 +117,7 @@ CMP_MD		EQU	CMP1MD
 CMP_MX		EQU	CMP1MX
 ENDIF
 
-$if NOT CUSTOM_COMP_SETUP
+$if NOT CUSTOM_COMPARATOR_SETUP
 
 Initialize_Comparator MACRO
 	mov	CMP_CN0, #80h				;; Comparator enabled, no hysteresis
@@ -126,22 +126,22 @@ ENDM
 
 $endif
 
-Read_Comp_Out MACRO
+Read_Comparator_Output MACRO
 	mov	A, CMP_CN0				;; Read comparator output
 ENDM
 
 ; Set comparator multiplexer to phase A
-Set_Comp_Phase_A MACRO
+Set_Comparator_Phase_A MACRO
 	mov	CMP_MX, #((A_Mux SHL 4) + V_Mux)
 ENDM
 
 ; Set comparator multiplexer to phase B
-Set_Comp_Phase_B MACRO
+Set_Comparator_Phase_B MACRO
 	mov	CMP_MX, #((B_Mux SHL 4) + V_Mux)
 ENDM
 
 ; Set comparator multiplexer to phase C
-Set_Comp_Phase_C MACRO
+Set_Comparator_Phase_C MACRO
 	mov	CMP_MX, #((C_Mux SHL 4) + V_Mux)
 ENDM
 

Layouts/O.inc

@@ -109,5 +109,5 @@ ENDM
 ;**** **** **** **** ****
 ; Inherit base layout
 ;**** **** **** **** ****
-$set(CUSTOM_COMP_SETUP)
+$set(CUSTOM_COMPARATOR_SETUP)
 $include (Base.inc)