I2C bypass mode permanently enabled on MPU6050.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@201 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61

src/drv_mpu6050.c

@@ -215,6 +215,7 @@ static void mpu6050GyroInit(void)
     delay(5);
     i2cWrite(MPU6050_ADDRESS, MPU_RA_SMPLRT_DIV, 0x00);      //SMPLRT_DIV    -- SMPLRT_DIV = 0  Sample Rate = Gyroscope Output Rate / (1 + SMPLRT_DIV)
     i2cWrite(MPU6050_ADDRESS, MPU_RA_PWR_MGMT_1, 0x03);      //PWR_MGMT_1    -- SLEEP 0; CYCLE 0; TEMP_DIS 0; CLKSEL 3 (PLL with Z Gyro reference)
+    i2cWrite(MPU6050_ADDRESS, MPU_RA_INT_PIN_CFG, 0 << 7 | 0 << 6 | 0 << 5 | 0 << 4 | 0 << 3 | 0 << 2 | 1 << 1 | 0 << 0);  // INT_PIN_CFG   -- INT_LEVEL_HIGH, INT_OPEN_DIS, LATCH_INT_DIS, INT_RD_CLEAR_DIS, FSYNC_INT_LEVEL_HIGH, FSYNC_INT_DIS, I2C_BYPASS_EN, CLOCK_DIS
     i2cWrite(MPU6050_ADDRESS, MPU_RA_CONFIG, MPU6050_DLPF_CFG);  //CONFIG        -- EXT_SYNC_SET 0 (disable input pin for data sync) ; default DLPF_CFG = 0 => ACC bandwidth = 260Hz  GYRO bandwidth = 256Hz)
     i2cWrite(MPU6050_ADDRESS, MPU_RA_GYRO_CONFIG, 0x18);      //GYRO_CONFIG   -- FS_SEL = 3: Full scale set to 2000 deg/sec