Merge pull request #5248 from iNavFlight/dzikuvx-not-used-target-cleanup

Disable not used targets

Makefile

@@ -126,13 +126,13 @@ else
 $(error Unknown target MCU specified.)
 endif
 
-GROUP_1_TARGETS := ALIENFLIGHTF3 ALIENFLIGHTF4 AIRHEROF3 AIRHEROF3_QUAD COLIBRI_RACE LUX_RACE SPARKY REVO SPARKY2 COLIBRI KISSFC FALCORE FF_F35_LIGHTNING FF_FORTINIF4 FF_PIKOF4 FF_PIKOF4OSD
+GROUP_1_TARGETS := AIRHEROF3 AIRHEROF3_QUAD COLIBRI_RACE LUX_RACE SPARKY REVO SPARKY2 COLIBRI FALCORE FF_F35_LIGHTNING FF_FORTINIF4 FF_PIKOF4 FF_PIKOF4OSD
 GROUP_2_TARGETS := SPRACINGF3 SPRACINGF3EVO SPRACINGF3EVO_1SS SPRACINGF3MINI SPRACINGF4EVO CLRACINGF4AIR CLRACINGF4AIRV2 BEEROTORF4 BETAFLIGHTF3 BETAFLIGHTF4 PIKOBLX
 GROUP_3_TARGETS := OMNIBUS AIRBOTF4 BLUEJAYF4 OMNIBUSF4 OMNIBUSF4PRO FIREWORKSV2 SPARKY2 MATEKF405 OMNIBUSF7 DYSF4PRO OMNIBUSF4PRO_LEDSTRIPM5 OMNIBUSF7NXT OMNIBUSF7V2 ASGARD32F4
-GROUP_4_TARGETS := ANYFC ANYFCF7 ANYFCF7_EXTERNAL_BARO ANYFCM7 ALIENFLIGHTNGF7 PIXRACER YUPIF4 YUPIF4MINI YUPIF4R2 YUPIF7 MATEKF405SE MATEKF411 MATEKF722 MATEKF405OSD MATEKF405_SERVOS6 NOX
-GROUP_5_TARGETS := ASGARD32F7 CHEBUZZF3 CLRACINGF4AIRV3 DALRCF405 DALRCF722DUAL DYSF4PROV2 F4BY FISHDRONEF4 FOXEERF405 FOXEERF722DUAL FRSKYF3 FRSKYF4 FURYF3 FURYF3_SPIFLASH FURYF4OSD
+GROUP_4_TARGETS := ANYFC ANYFCF7 ANYFCF7_EXTERNAL_BARO ALIENFLIGHTNGF7 PIXRACER YUPIF7 MATEKF405SE MATEKF411 MATEKF722 MATEKF405OSD MATEKF405_SERVOS6 NOX
+GROUP_5_TARGETS := ASGARD32F7 CLRACINGF4AIRV3 DALRCF405 DALRCF722DUAL DYSF4PROV2 F4BY FISHDRONEF4 FOXEERF405 FOXEERF722DUAL FRSKYF3 FRSKYF4 FURYF3 FURYF3_SPIFLASH FURYF4OSD
 GROUP_6_TARGETS := MAMBAF405 OMNIBUSF4V3 OMNIBUSF4V3_S6_SS OMNIBUSF4V3_S5S6_SS OMNIBUSF4V3_S5_S6_2SS AIKONF4
-GROUP_7_TARGETS := KAKUTEF4 KAKUTEF4V2 KAKUTEF7 KAKUTEF7MINI KFC32F3_INAV KROOZX MATEKF411_RSSI MATEKF411_SFTSRL2 MATEKF722MINI MATEKF722SE MATEKF722_HEXSERVO
+GROUP_7_TARGETS := KAKUTEF4 KAKUTEF4V2 KAKUTEF7 KAKUTEF7MINI KFC32F3_INAV MATEKF411_RSSI MATEKF411_SFTSRL2 MATEKF722MINI MATEKF722SE MATEKF722_HEXSERVO
 GROUP_8_TARGETS := MATEKF765
 GROUP_OTHER_TARGETS := $(filter-out $(GROUP_1_TARGETS) $(GROUP_2_TARGETS) $(GROUP_3_TARGETS) $(GROUP_4_TARGETS) $(GROUP_5_TARGETS) $(GROUP_6_TARGETS) $(GROUP_7_TARGETS) $(GROUP_8_TARGETS), $(VALID_TARGETS))
 

build_docs.sh

@@ -29,7 +29,6 @@ doc_files=(
 	'Migrating from baseflight.md'
 	'Boards.md'
 	'Board - AlienFlight.md'
-    'Board - ChebuzzF3.md'
     'Board - ColibriRace.md'
 	'Board - Motolab.md'
     'Board - Paris Air Hero 32.md'

docs/1wire.md

@@ -58,7 +58,7 @@ The following parameters can be used to enable and configure this in the related
 
        ```
        // Define your esc hardware
-       #if defined(STM32F3DISCOVERY) && !(defined(CHEBUZZF3))
+       #if defined(STM32F3DISCOVERY)
        const escHardware_t escHardware[ESC_COUNT] = {
          { GPIOD, 12 },
          { GPIOD, 13 },

docs/Board - ChebuzzF3.md

@@ -1,10 +1,3 @@
-# Board - ChebuzzF3
-
-The ChebuzzF3 is a daugter board which connects to the bottom of an STM32F3Discovery board and provides pin headers and ports for various FC connections.
-
-All connections were traced using a multimeter and then verified against the TauLabs source code using the revision linked.
-
-https://github.com/TauLabs/TauLabs/blob/816760dec2a20db7fb9ec1a505add240e696c31f/flight/targets/flyingf3/board-info/board_hw_defs.c
 
 ## Connections
 

docs/LedStrip.md

@@ -50,7 +50,7 @@ from another BEC.  Just ensure that the GROUND is the same for all BEC outputs a
 
 | Target                | Pin  | LED Strip | Signal |
 | --------------------- | ---- | --------- | -------|
-| ChebuzzF3/F3Discovery | PB8  | Data In   | PB8    |
+| F3Discovery | PB8  | Data In   | PB8    |
 | Sparky                | PWM5 | Data In   | PA6    |
 
 If you have LEDs that are intermittent, flicker or show the wrong colors then drop the VIN to less than 4.7v, e.g. by using an inline

fake_travis_build.sh

@@ -2,7 +2,6 @@
 
 targets=("PUBLISHMETA=True" \
     "RUNTESTS=True" \
-    "TARGET=CHEBUZZF3" \
     "TARGET=COLIBRI_RACE" \
     "TARGET=SPRACINGF3" \
     "TARGET=SPRACINGF3EVO" \
@@ -11,7 +10,6 @@ targets=("PUBLISHMETA=True" \
     "TARGET=RMDO" \
     "TARGET=SPARKY" \
     "TARGET=STM32F3DISCOVERY" \
-    "TARGET=ALIENFLIGHTF3"\
     "TARGET=RCEXPLORERF3" )
 #fake a travis build environment
 export TRAVIS_BUILD_NUMBER=$(date +%s)

make/release.mk

@@ -1,7 +1,7 @@
 RELEASE_TARGETS = AIRHEROF3 AIRHEROF3_QUAD
 
 RELEASE_TARGETS += COLIBRI_RACE LUX_RACE FURYF3 FURYF3_SPIFLASH RCEXPLORERF3 RMDO SPARKY KFC32F3_INAV FALCORE MOTOLAB ANYFC BLUEJAYF4 COLIBRI F4BY DALRCF405
-RELEASE_TARGETS += QUANTON REVO SPARKY2 YUPIF4 YUPIF4R2 YUPIF4MINI KROOZX PIKOBLX CLRACINGF4AIR CLRACINGF4AIRV2 PIXRACER BEEROTORF4 ANYFCF7 ANYFCF7_EXTERNAL_BARO ANYFCM7
+RELEASE_TARGETS += QUANTON REVO SPARKY2 PIKOBLX CLRACINGF4AIR CLRACINGF4AIRV2 PIXRACER BEEROTORF4 ANYFCF7 ANYFCF7_EXTERNAL_BARO
 RELEASE_TARGETS += ALIENFLIGHTNGF7
 
 RELEASE_TARGETS += BETAFLIGHTF3 BETAFLIGHTF4

src/main/fc/fc_init.c

@@ -217,12 +217,8 @@ void init(void)
 
     // Latch active features to be used for feature() in the remainder of init().
     latchActiveFeatures();
-
-#ifdef ALIENFLIGHTF3
-    ledInit(hardwareRevision == AFF3_REV_1 ? false : true);
-#else
+    
     ledInit(false);
-#endif
 
 #ifdef USE_EXTI
     EXTIInit();