Create target.h

src/main/target/AOCODARCF7DUAL/target.h

@@ -0,0 +1,182 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "AO7D"
+#define USBD_PRODUCT_STRING  "AocodaRCF7Dual"
+
+
+#define LED0                    PC14  //Blue
+
+#define BEEPER                  PC13
+#define BEEPER_INVERTED
+
+// *************** SPI1 Gyro & ACC *******************
+#define USE_SPI
+#define USE_SPI_DEVICE_2
+#define SPI2_SCK_PIN            PB13
+#define SPI2_MISO_PIN           PB14
+#define SPI2_MOSI_PIN           PB15
+
+#define USE_EXTI
+#define USE_DUAL_GYRO
+#define USE_MPU_DATA_READY_SIGNAL
+#define ENSURE_MPU_DATA_READY_IS_LOW
+#define USE_TARGET_IMU_HARDWARE_DESCRIPTORS
+
+#define USE_IMU_MPU6000
+#define IMU_MPU6000_ALIGN       CW270_DEG
+#define MPU6000_CS_PIN          PB12
+#define MPU6000_SPI_BUS         BUS_SPI2
+#define MPU6000_EXTI_PIN        PC4
+
+#define USE_IMU_MPU6500
+#define IMU_MPU6500_ALIGN       CW270_DEG
+#define MPU6500_CS_PIN          PB12
+#define MPU6500_SPI_BUS         BUS_SPI2
+#define MPU6500_EXTI_PIN        PC4
+
+#define USE_IMU_BMI270
+#define IMU_BMI270_ALIGN        CW180_DEG
+#define BMI270_CS_PIN           PA13
+#define BMI270_SPI_BUS          BUS_SPI2
+#define BMI270_EXTI_PIN         PA8
+
+// *************** I2C /Baro/Mag *********************
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C1_SCL                PB8
+#define I2C1_SDA                PB9
+
+#define USE_BARO
+#define BARO_I2C_BUS            BUS_I2C1
+#define USE_BARO_BMP280
+#define USE_BARO_MS5611
+#define USE_BARO_MS5607
+#define USE_BARO_DPS310
+
+#define USE_I2C_DEVICE_2
+#define I2C2_SCL                PB10
+#define I2C2_SDA                PB11
+
+#define USE_MAG
+#define MAG_I2C_BUS             BUS_I2C2
+#define USE_MAG_AK8975
+#define USE_MAG_HMC5883
+#define USE_MAG_QMC5883
+#define USE_MAG_IST8310
+#define USE_MAG_IST8308
+#define USE_MAG_MAG3110
+#define USE_MAG_LIS3MDL
+
+#define TEMPERATURE_I2C_BUS     BUS_I2C2
+
+#define PITOT_I2C_BUS           BUS_I2C2
+
+#define USE_RANGEFINDER
+#define RANGEFINDER_I2C_BUS     BUS_I2C2
+
+// *************** SPI2 OSD ***********************
+#define USE_SPI_DEVICE_1
+#define SPI1_SCK_PIN            PA5
+#define SPI1_MISO_PIN           PA6
+#define SPI1_MOSI_PIN           PA7
+
+#define USE_OSD
+#define USE_MAX7456
+#define MAX7456_SPI_BUS         BUS_SPI1
+#define MAX7456_CS_PIN          PA4
+
+// *************** SPI3 FLASH BLACKBOX*******************
+#define USE_SPI_DEVICE_3
+#define SPI3_SCK_PIN            PB3
+#define SPI3_MISO_PIN           PB4
+#define SPI3_MOSI_PIN           PB5
+
+
+#define USE_FLASHFS
+#define USE_FLASH_M25P16
+#define M25P16_SPI_BUS          BUS_SPI3
+#define M25P16_CS_PIN           PC0
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+
+
+// *************** UART *****************************
+#define USE_VCP
+#define USB_DETECT_PIN          PC15
+#define USE_USB_DETECT
+
+#define USE_UART1
+#define UART1_TX_PIN            PA9
+#define UART1_RX_PIN            PA10
+
+#define USE_UART2
+#define UART2_TX_PIN            PA2
+#define UART2_RX_PIN            PA3
+
+#define USE_UART3
+#define UART3_TX_PIN            PC10
+#define UART3_RX_PIN            PC11
+
+#define USE_UART4
+#define UART4_TX_PIN            NONE
+#define UART4_RX_PIN            PA1
+
+#define USE_UART5
+#define UART5_TX_PIN            PC12
+#define UART5_RX_PIN            PD2
+     
+#define SERIAL_PORT_COUNT       6
+
+#define DEFAULT_RX_TYPE         RX_TYPE_SERIAL
+#define SERIALRX_PROVIDER       SERIALRX_SBUS
+#define SERIALRX_UART           SERIAL_PORT_USART1
+
+// *************** ADC *****************************
+#define USE_ADC
+#define ADC_INSTANCE                ADC1
+#define ADC1_DMA_STREAM             DMA2_Stream0
+
+#define ADC_CHANNEL_1_PIN           PC1
+#define ADC_CHANNEL_2_PIN           PC2
+#define ADC_CHANNEL_3_PIN           PC3
+
+
+#define VBAT_ADC_CHANNEL            ADC_CHN_2
+#define CURRENT_METER_ADC_CHANNEL   ADC_CHN_1
+#define RSSI_ADC_CHANNEL            ADC_CHN_3
+
+// *************** LEDSTRIP ************************
+#define USE_LED_STRIP
+#define WS2811_PIN                  PA0
+
+#define DEFAULT_FEATURES                (FEATURE_OSD | FEATURE_TELEMETRY | FEATURE_CURRENT_METER | FEATURE_VBAT | FEATURE_TX_PROF_SEL | FEATURE_BLACKBOX)
+#define CURRENT_METER_SCALE     650
+
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+
+#define TARGET_IO_PORTA 0xffff
+#define TARGET_IO_PORTB 0xffff
+#define TARGET_IO_PORTC 0xffff
+#define TARGET_IO_PORTD 0xffff
+
+#define MAX_PWM_OUTPUT_PORTS        10
+#define USE_DSHOT
+#define USE_SERIALSHOT
+#define USE_ESC_SENSOR