# Board - DALRCF405 The DALRCF405 described here: http://www.dalrcmodel.com/DALRC/plus/view.php?aid=184 This board use the STM32F405RGT6 microcontroller and have the following features: * 1024K bytes of flash memory,192K bytes RAM,168 MHz CPU/210 DMIPS * The 16M byte SPI flash for data logging * USB VCP and boot select button on board(for DFU) * Stable voltage regulation,9V/2A DCDC BEC for VTX/camera etc.And could select 5v/9v * Serial LED interface(LED_STRIP) * VBAT/CURR/RSSI sensors input * Suppose IRC Tramp/smart audio/FPV Camera Control/FPORT/telemetry * Supports SBus, Spektrum1024/2048, PPM. No external inverters required (built-in). * Supports I2C device extend(baro/compass/OLED etc) * Supports GPS ### Uarts | Value | Identifier | RX | TX | Notes | | ----- | ------------ | -----| -----| ------------------------------------------------------------------------------------------- | | 1 | USART1 | PB7 | PA9 | PB7 FOR SBUS IN(inverter build in) | | 2 | USART2 | PA3 | PA2 | PAD USE FOR TRAMP/smart audio | | 3 | USART3 | PB11 | PB10| USE FOR GPS | | 4 | USART4 | PA1 | PA0 | PA0 FOR RSSI/FPORT/TEL etc | | 5 | USART5 | PD2 | PC12| PAD | ### I2C with GPS port together.Use for BARO or compass etc | Value | Identifier | function | pin | Notes | | ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- | | 1 | I2C1 | SDA | PB9 | with GPS outlet | 2 | I2C1 | SCL | PB8 | with GPS outlet ### Buzzer/LED output | Value | Identifier | function | pin | Notes | | ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- | | 1 | LED0 | LED | PC14 | | 2 | BEEPER | BEE | PC13 | ### VBAT input with 1/10 divider ratio,Current signal input,Analog/digit RSSI input | Value | Identifier | function | pin | Notes | | ----- | ------------ | ----------| ------| ------------------------------------------------------------------------------------- | | 1 | ADC1 | VBAT | PC2 | DMA2_Stream0 | 2 | ADC1 | CURR | PC1 | DMA2_Stream0 | 3 | ADC1 | RSSI | PA0 | DMA2_Stream0 | 4 | ADC1 | extend | PC0 | DMA2_Stream0 extend for other senser(PAD) ### 8 Outputs, 1 PPM input | Value | Identifier | function | pin | Notes | | ----- | ------------ | ----------| ------| ------------------------------------------------------------------------------------- | | 1 | TIM12_CH2 | PPM | PB15 | PPM | 2 | TIM3_CH3 | OUPUT1 | PB0 | DMA1_Stream7 | 3 | TIM8_CH1 | OUPUT2 | PC6 | DMA2_Stream2 | 4 | TIM1_CH3 | OUPUT3 | PA10 | DMA2_Stream6 | 5 | TIM1_CH1 | OUPUT4 | PA8 | DMA2_Stream1 | 6 | TIM8_CH3 | OUPUT5 | PC8 | DMA2_Stream4 | 7 | TIM3_CH4 | OUPUT6 | PB1 | DMA1_Stream2 | 8 | TIM3_CH2 | OUPUT7 | PC7 | DMA1_Stream5 | 9 | TIM8_CH4 | OUPUT8 | PC9 | DMA2_Stream7 | 10 | TIM4_CH1 | PWM | PB6 | DMA1_Stream0 LED_STRIP | 11 | TIM2_CH1 | PWM | PA5 | FPV Camera Control(FCAM) ### Gyro & ACC ,suppose ICM20689/MPU6000 | Value | Identifier | function | pin | Notes | | ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- | | 1 | SPI1 | SCK | PB3 | | 2 | SPI1 | MISO | PA6 | | 3 | SPI1 | MOSI | PA7 | | 4 | SPI1 | CS | PC4 | ### OSD MAX7456 | Value | Identifier | function | pin | Notes | | ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- | | 1 | SPI3 | SCK | PC10 | | 2 | SPI3 | MISO | PC11 | | 3 | SPI3 | MOSI | PB5 | | 4 | SPI3 | CS | PA15 | ### 16Mbyte flash | Value | Identifier | function | pin | Notes | | ----- | ------------ | ---------| -------| ------------------------------------------------------------------------------------- | | 1 | SPI2 | SCK | PB13 | | 2 | SPI2 | MISO | PB14 | | 3 | SPI2 | MOSI | PC3 | | 4 | SPI2 | CS | PB12 | ### SWD | Pin | Function | Notes | | --- | -------------- | -------------------------------------------- | | 1 | SWCLK | PAD | | 2 | Ground | PAD | | 3 | SWDIO | PAD | | 4 | 3V3 | PAD | ### Designers * ZhengNyway(nyway@vip.qq.com) FROM DALRC