You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
37 lines
1.5 KiB
37 lines
1.5 KiB
// See SetupX_Template.h for all options available
|
|
#define USER_SETUP_ID 3
|
|
|
|
#define ILI9163_DRIVER
|
|
|
|
|
|
#define TFT_WIDTH 128
|
|
#define TFT_HEIGHT 160
|
|
|
|
|
|
// For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation
|
|
#define TFT_CS PIN_D8 // Chip select control pin D8
|
|
#define TFT_DC PIN_D3 // Data Command control pin
|
|
#define TFT_RST PIN_D4 // Reset pin (could connect to NodeMCU RST, see next line)
|
|
//#define TFT_RST -1 // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
|
|
|
|
|
|
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
|
|
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
|
|
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
|
|
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
|
|
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
|
|
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
|
|
|
|
#define SMOOTH_FONT
|
|
|
|
|
|
// #define SPI_FREQUENCY 20000000
|
|
#define SPI_FREQUENCY 27000000
|
|
// #define SPI_FREQUENCY 40000000
|
|
|
|
#define SPI_TOUCH_FREQUENCY 2500000
|
|
|
|
|
|
// #define SUPPORT_TRANSACTIONS
|