You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 

116 lines
2.5 KiB

// This is the command sequence that initialises the HX8357C driver
//
// This setup information uses simple 8 bit SPI writecommand() and writedata() functions
//
// See ST7735_Setup.h file for an alternative format
// Configure HX8357C display
writecommand(0xB9); // Enable extension command
writedata(0xFF);
writedata(0x83);
writedata(0x57);
delay(50);
writecommand(0xB6); //Set VCOM voltage
writedata(0x2C); //0x52 for HSD 3.0"
writecommand(0x11); // Sleep off
delay(200);
writecommand(0x35); // Tearing effect on
writedata(0x00); // Added parameter
writecommand(0x3A); // Interface pixel format
writedata(0x55); // 16 bits per pixel
//writecommand(0xCC); // Set panel characteristic
//writedata(0x09); // S960>S1, G1>G480, R-G-B, normally black
//writecommand(0xB3); // RGB interface
//writedata(0x43);
//writedata(0x00);
//writedata(0x06);
//writedata(0x06);
writecommand(0xB1); // Power control
writedata(0x00);
writedata(0x15);
writedata(0x0D);
writedata(0x0D);
writedata(0x83);
writedata(0x48);
writecommand(0xC0); // Does this do anything?
writedata(0x24);
writedata(0x24);
writedata(0x01);
writedata(0x3C);
writedata(0xC8);
writedata(0x08);
writecommand(0xB4); // Display cycle
writedata(0x02);
writedata(0x40);
writedata(0x00);
writedata(0x2A);
writedata(0x2A);
writedata(0x0D);
writedata(0x4F);
writecommand(0xE0); // Gamma curve
writedata(0x00);
writedata(0x15);
writedata(0x1D);
writedata(0x2A);
writedata(0x31);
writedata(0x42);
writedata(0x4C);
writedata(0x53);
writedata(0x45);
writedata(0x40);
writedata(0x3B);
writedata(0x32);
writedata(0x2E);
writedata(0x28);
writedata(0x24);
writedata(0x03);
writedata(0x00);
writedata(0x15);
writedata(0x1D);
writedata(0x2A);
writedata(0x31);
writedata(0x42);
writedata(0x4C);
writedata(0x53);
writedata(0x45);
writedata(0x40);
writedata(0x3B);
writedata(0x32);
writedata(0x2E);
writedata(0x28);
writedata(0x24);
writedata(0x03);
writedata(0x00);
writedata(0x01);
writecommand(0x36); // MADCTL Memory access control
writedata(0x48);
delay(20);
writecommand(0x21); //Display inversion on
delay(20);
writecommand(0x29); // Display on
delay(120);
// End of HX8357C display configuration