You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
421 lines
9.6 KiB
421 lines
9.6 KiB
;**** **** **** **** ****
|
|
;
|
|
; BLHeli program for controlling brushless motors in helicopters and multirotors
|
|
;
|
|
; Copyright 2011, 2012 Steffen Skaug
|
|
; This program is distributed under the terms of the GNU General Public License
|
|
;
|
|
; This file is part of BLHeli.
|
|
;
|
|
; BLHeli is free software: you can redistribute it and/or modify
|
|
; it under the terms of the GNU General Public License as published by
|
|
; the Free Software Foundation, either version 3 of the License, or
|
|
; (at your option) any later version.
|
|
;
|
|
; BLHeli is distributed in the hope that it will be useful,
|
|
; but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
; GNU General Public License for more details.
|
|
;
|
|
; You should have received a copy of the GNU General Public License
|
|
; along with BLHeli. If not, see <http://www.gnu.org/licenses/>.
|
|
;
|
|
;**** **** **** **** ****
|
|
;
|
|
; Multistar 45A hardware definition file
|
|
;
|
|
; Notes: None
|
|
;
|
|
;**** **** **** **** ****
|
|
|
|
|
|
;*********************
|
|
; Device Atmega8A
|
|
;*********************
|
|
.INCLUDE "m8Adef.inc"
|
|
|
|
;**** **** **** **** ****
|
|
; Fuses must be set to external oscillator = 16Mhz
|
|
;**** **** **** **** ****
|
|
|
|
;**** **** **** **** ****
|
|
; Constant definitions
|
|
;**** **** **** **** ****
|
|
.ESEG ; EEprom segment
|
|
.ORG 0x40
|
|
Eep_ESC_Layout: .DB "#MStar_45A# " ; ESC layout tag
|
|
.ORG 0x50
|
|
Eep_ESC_MCU: .DB "#BLHELI#Am8A# " ; Project and MCU tag (16 Bytes)
|
|
|
|
.EQU HIGH_BEC_VOLTAGE = 0 ; Set to 1 or more if high BEC voltage is supported
|
|
.EQU DAMPED_MODE_ENABLE = 1 ; Set to 1 if fully damped mode is supported
|
|
.EQU NFETON_DELAY = 7 ; Wait delay from pfets off to nfets on
|
|
.EQU PFETON_DELAY = 9 ; Wait delay from nfets off to pfets on
|
|
.EQU ADC_LIMIT_L = 52 ; 2k/47k divider with empirical correction. Power supply measurement ADC value for which motor power is limited (low byte)
|
|
.EQU ADC_LIMIT_H = 0 ; 2k/47k divider with empirical correction. Power supply measurement ADC value for which motor power is limited (2 MSBs)
|
|
.EQU TEMP_LIMIT = 0 ; No sensor. Temperature measurement ADC value for which main motor power is limited
|
|
.EQU TEMP_LIMIT_STEP = 0 ; No sensor. Temperature measurement ADC value increment for which main motor power is further limited
|
|
|
|
;**** **** **** **** ****
|
|
; ESC specific defaults
|
|
;**** **** **** **** ****
|
|
.EQU DEFAULT_PGM_MAIN_SPOOLUP_TIME = 10 ; Main motor spoolup time
|
|
.EQU DEFAULT_PGM_MAIN_STARTUP_PWR = 9 ; 1=0.031 2=0.047 3=0.063 4=0.094 5=0.125 6=0.188 7=0.25 8=0.38 9=0.50 10=0.75 11=1.00 12=1.25 13=1.50
|
|
.EQU DEFAULT_PGM_TAIL_STARTUP_PWR = 9 ; 1=0.031 2=0.047 3=0.063 4=0.094 5=0.125 6=0.188 7=0.25 8=0.38 9=0.50 10=0.75 11=1.00 12=1.25 13=1.50
|
|
.EQU DEFAULT_PGM_MULTI_STARTUP_PWR = 9 ; 1=0.031 2=0.047 3=0.063 4=0.094 5=0.125 6=0.188 7=0.25 8=0.38 9=0.50 10=0.75 11=1.00 12=1.25 13=1.50
|
|
|
|
|
|
;*********************
|
|
; PORT D definitions *
|
|
;*********************
|
|
.EQU CpFET = 7 ;o
|
|
;.EQU = 6 ;i
|
|
.EQU CnFET = 5 ;o
|
|
.EQU BnFET = 4 ;o
|
|
.EQU BpFET = 3 ;o
|
|
.EQU Rcp_In = 2 ;i
|
|
.EQU ApFET = 1 ;o
|
|
.EQU AnFET = 0 ;o
|
|
|
|
.equ INIT_PD = (1<<AnFET)+(1<<BnFET)+(1<<CnFET)
|
|
.equ DIR_PD = (1<<AnFET)+(1<<BnFET)+(1<<CnFET)+(1<<ApFET)+(1<<BpFET)+(1<<CpFET)
|
|
|
|
|
|
.MACRO Get_Rcp_Capture_Values
|
|
in @0, TCNT1L
|
|
in @1, TCNT1H
|
|
.ENDMACRO
|
|
.MACRO Read_Rcp_Int
|
|
in @0, PIND
|
|
sbrs Flags3, PGM_RCP_PWM_POL ; Is pwm polarity positive?
|
|
com @0 ; Yes - invert
|
|
.ENDMACRO
|
|
.MACRO Get_Rcp_Int_Enable_State
|
|
in @0, GICR ; Get int0 enable state (giving 0 is off, anything else is on)
|
|
andi @0, (1<<INT0)
|
|
.ENDMACRO
|
|
.MACRO Rcp_Int_Enable
|
|
ldi @0, (1<<INT0) ; Enable int0
|
|
out GICR, @0
|
|
.ENDMACRO
|
|
.MACRO Rcp_Int_Disable
|
|
ldi @0, 0 ; Disable int0
|
|
out GICR, @0
|
|
.ENDMACRO
|
|
.MACRO Rcp_Int_First
|
|
ldi @0, (1<<ISC01)+(1<<ISC00); Default - set next int0 to rising
|
|
sbrs Flags3, PGM_RCP_PWM_POL ; Is pwm polarity positive?
|
|
ldi @0, (1<<ISC01) ; Yes - set next int0 to falling
|
|
out MCUCR, @0
|
|
.ENDMACRO
|
|
.MACRO Rcp_Int_Second
|
|
ldi @0, (1<<ISC01) ; Default - set next int0 to falling
|
|
sbrs Flags3, PGM_RCP_PWM_POL ; Is pwm polarity positive?
|
|
ldi @0, (1<<ISC01)+(1<<ISC00); Yes - set next int0 to rising
|
|
out MCUCR, @0
|
|
.ENDMACRO
|
|
.MACRO Rcp_Clear_Int_Flag
|
|
clr @0
|
|
sbr @0, (1<<INTF0) ; Clear ext0int flag
|
|
out GIFR, @0
|
|
.ENDMACRO
|
|
|
|
.MACRO T0_Int_Disable
|
|
in @0, TIMSK ; Disable timer0 interrupts
|
|
cbr @0, (1<<TOIE0)
|
|
out TIMSK, @0
|
|
.ENDMACRO
|
|
.MACRO T0_Int_Enable
|
|
in @0, TIMSK ; Enable timer0 interrupts
|
|
sbr @0, (1<<TOIE0)
|
|
out TIMSK, @0
|
|
.ENDMACRO
|
|
.MACRO T1oca_Clear_Int_Flag
|
|
ldi @0, (1<<OCF1A) ; Clear oc1a flag
|
|
out TIFR, @0
|
|
.ENDMACRO
|
|
.MACRO T1oca_Int_Disable
|
|
in @0, TIMSK ; Disable oc1a interrupts
|
|
cbr @0, (1<<OCIE1A)
|
|
out TIMSK, @0
|
|
.ENDMACRO
|
|
.MACRO T1oca_Int_Enable
|
|
in @0, TIMSK ; Enable oc1a interrupts
|
|
sbr @0, (1<<OCIE1A)
|
|
out TIMSK, @0
|
|
.ENDMACRO
|
|
.MACRO T2_Clear_Int_Flag
|
|
clr @0
|
|
sbr @0, (1<<TOV2) ; Clear tov2 flag
|
|
out TIFR, @0
|
|
.ENDMACRO
|
|
|
|
|
|
;*********************
|
|
; PORT C definitions *
|
|
;*********************
|
|
.EQU Volt_Ip = 7 ; i
|
|
;.EQU = 6 ; i
|
|
;.EQU = 5 ; i
|
|
.EQU Mux_A = 4 ; i
|
|
.EQU Mux_B = 3 ; i
|
|
.EQU Mux_C = 2 ; i
|
|
;.EQU = 1 ; i
|
|
;.EQU = 0 ; i
|
|
|
|
.equ INIT_PC = 0x00
|
|
.equ DIR_PC = 0x00
|
|
|
|
|
|
.MACRO AnFET_on
|
|
cbi PORTD, AnFET
|
|
.ENDMACRO
|
|
.MACRO AnFET_off
|
|
sbi PORTD, AnFET
|
|
.ENDMACRO
|
|
.MACRO BnFET_on
|
|
cbi PORTD, BnFET
|
|
.ENDMACRO
|
|
.MACRO BnFET_off
|
|
sbi PORTD, BnFET
|
|
.ENDMACRO
|
|
.MACRO CnFET_on
|
|
cbi PORTD, CnFET
|
|
.ENDMACRO
|
|
.MACRO CnFET_off
|
|
sbi PORTD, CnFET
|
|
.ENDMACRO
|
|
.MACRO All_nFETs_Off
|
|
sbi PORTD, AnFET
|
|
sbi PORTD, BnFET
|
|
sbi PORTD, CnFET
|
|
.ENDMACRO
|
|
|
|
.MACRO ApFET_on
|
|
sbi PORTD, ApFET
|
|
.ENDMACRO
|
|
.MACRO ApFET_off
|
|
cbi PORTD, ApFET
|
|
.ENDMACRO
|
|
.MACRO BpFET_on
|
|
sbi PORTD, BpFET
|
|
.ENDMACRO
|
|
.MACRO BpFET_off
|
|
cbi PORTD, BpFET
|
|
.ENDMACRO
|
|
.MACRO CpFET_on
|
|
sbi PORTD, CpFET
|
|
.ENDMACRO
|
|
.MACRO CpFET_off
|
|
cbi PORTD, CpFET
|
|
.ENDMACRO
|
|
.MACRO All_pFETs_Off
|
|
cbi PORTD, ApFET
|
|
cbi PORTD, BpFET
|
|
cbi PORTD, CpFET
|
|
.ENDMACRO
|
|
|
|
.MACRO Brake_FETs_On
|
|
AnFET_on
|
|
BnFET_on
|
|
CnFET_on
|
|
.ENDMACRO
|
|
.MACRO Damping_FET_On
|
|
lds @0, DampingFET
|
|
sbrc @0, 0
|
|
sbi PORTD, ApFET
|
|
sbrc @0, 1
|
|
sbi PORTD, BpFET
|
|
sbrc @0, 2
|
|
sbi PORTD, CpFET
|
|
.ENDMACRO
|
|
|
|
.MACRO Comp_Init
|
|
in @0, SFIOR ; Toggle Analog Comparator Multiplexer Enable
|
|
cbr @0, (1<<ACME)
|
|
out SFIOR, @0
|
|
Read_Comp_Out @0
|
|
in @0, SFIOR
|
|
sbr @0, (1<<ACME)
|
|
out SFIOR, @0
|
|
.ENDMACRO
|
|
.MACRO Set_Comp_Phase_A
|
|
ldi @0, Mux_A ; Set comparator multiplexer to phase A
|
|
ori @0, (1<<REFS1)+(1<<REFS0)
|
|
out ADMUX, @0
|
|
.ENDMACRO
|
|
.MACRO Set_Comp_Phase_B
|
|
ldi @0, Mux_B ; Set comparator multiplexer to phase B
|
|
ori @0, (1<<REFS1)+(1<<REFS0)
|
|
out ADMUX, @0
|
|
.ENDMACRO
|
|
.MACRO Set_Comp_Phase_C
|
|
ldi @0, Mux_C ; Set comparator multiplexer to phase C
|
|
ori @0, (1<<REFS1)+(1<<REFS0)
|
|
out ADMUX, @0
|
|
.ENDMACRO
|
|
.MACRO Read_Comp_Out
|
|
in @0, ACSR ; Read comparator output
|
|
.ENDMACRO
|
|
|
|
|
|
;*********************
|
|
; PORT B definitions *
|
|
;*********************
|
|
;.EQU = 7 ; i
|
|
;.EQU = 6 ; i
|
|
;.EQU = 5 ; i
|
|
.EQU DebugPin = 4 ; o
|
|
;.EQU = 3 ; i
|
|
.EQU NfetPullup = 2 ; 0
|
|
;.EQU = 1 ; i
|
|
;.EQU = 0 ; i
|
|
|
|
.EQU INIT_PB = (1<<NfetPullup)
|
|
.EQU DIR_PB = (1<<DebugPin)+(1<<NfetPullup)
|
|
|
|
|
|
|
|
;**********************
|
|
; MCU specific macros *
|
|
;**********************
|
|
.MACRO Interrupt_Table_Definition
|
|
rjmp reset
|
|
rjmp rcp_int ; ext_int0
|
|
nop ; ext_int1
|
|
nop ; t2oc_int
|
|
rjmp t2_int ; t2ovfl_int
|
|
nop ; icp1_int
|
|
rjmp t1oca_int ; t1oca_int
|
|
nop ; t1ocb_int
|
|
nop ; t1ovfl_int
|
|
rjmp t0_int ; t0ovfl_int
|
|
nop ; spi_int
|
|
nop ; urxc
|
|
nop ; udre
|
|
nop ; utxc
|
|
; nop ; adc_int
|
|
; nop ; eep_int
|
|
; nop ; aci_int
|
|
; nop ; wire2_int
|
|
; nop ; spmc_int
|
|
.ENDMACRO
|
|
|
|
.MACRO Disable_Watchdog
|
|
cli ; Disable interrupts
|
|
wdr ; Reset watchdog timer
|
|
in @0, WDTCR ; Write logical one to WDCE and WDE
|
|
ori @0, (1<<WDCE)|(1<<WDE)
|
|
out WDTCR, @0
|
|
ldi @0, (0<<WDE) ; Turn off WDT
|
|
out WDTCR, @0
|
|
.ENDMACRO
|
|
.MACRO Enable_Watchdog
|
|
ldi @0, (1<<WDE) ; Turn on WDT
|
|
out WDTCR, @0
|
|
.ENDMACRO
|
|
|
|
.MACRO Initialize_MCU
|
|
.ENDMACRO
|
|
|
|
.MACRO Initialize_Interrupts
|
|
ldi @0, (1<<TOIE0)+(1<<OCIE1A)+(1<<TOIE2)
|
|
out TIFR, @0 ; Clear interrupts
|
|
out TIMSK, @0 ; Enable interrupts
|
|
.ENDMACRO
|
|
|
|
.MACRO Initialize_Adc
|
|
ldi @0, Volt_Ip
|
|
ori @0, (1<<REFS1)+(1<<REFS0)
|
|
out ADMUX, @0 ; Set ADMUX register
|
|
in @0, ADCSRA ; Set ADCSRA register (1MHz clock)
|
|
sbr @0, (1<<ADPS2)
|
|
sbr @0, (1<<ADEN) ; Enable ADC
|
|
out ADCSRA, @0
|
|
.ENDMACRO
|
|
|
|
.MACRO Set_Adc_Ip_Volt
|
|
cbr Flags1, (1<<ADC_READ_TEMP)
|
|
.ENDMACRO
|
|
.MACRO Set_Adc_Ip_Temp
|
|
sbr Flags1, (1<<ADC_READ_TEMP)
|
|
.ENDMACRO
|
|
.MACRO Start_Adc
|
|
ldi @0, Volt_Ip
|
|
sbrc Flags1, ADC_READ_TEMP
|
|
ldi @0, Volt_Ip ; No temp sensor
|
|
ori @0, (1<<REFS1)+(1<<REFS0)
|
|
out ADMUX, @0 ; Set ADMUX register (2.56V reference, selected input)
|
|
in @0, ADCSRA
|
|
sbr @0, (1<<ADEN) ; Enable ADC
|
|
sbr @0, (1<<ADSC) ; Start ADC conversion
|
|
out ADCSRA, @0
|
|
.ENDMACRO
|
|
.MACRO Get_Adc_Status
|
|
in @0, ADCSRA
|
|
.ENDMACRO
|
|
.MACRO Read_Adc_Result
|
|
in @0, ADCL
|
|
in @1, ADCH
|
|
.ENDMACRO
|
|
.MACRO Stop_Adc
|
|
in @0, ADCSRA
|
|
cbr @0, (1<<ADEN) ; Disable ADC
|
|
out ADCSRA, @0
|
|
.ENDMACRO
|
|
|
|
.MACRO Set_Timer0_CS0
|
|
out TCCR0, @0
|
|
.ENDMACRO
|
|
.MACRO Set_Timer1_CS1
|
|
out TCCR1B, @0
|
|
.ENDMACRO
|
|
.MACRO Set_Timer2_CS2
|
|
out TCCR2, @0
|
|
.ENDMACRO
|
|
|
|
.MACRO Read_TCNT1L
|
|
in @0, TCNT1L
|
|
.ENDMACRO
|
|
.MACRO Read_TCNT1H
|
|
in @0, TCNT1H
|
|
.ENDMACRO
|
|
.MACRO Set_OCR1AL
|
|
out OCR1AL, @0
|
|
.ENDMACRO
|
|
.MACRO Set_OCR1AH
|
|
out OCR1AH, @0
|
|
.ENDMACRO
|
|
|
|
.MACRO Read_TCNT2
|
|
in @0, TCNT2
|
|
.ENDMACRO
|
|
.MACRO Set_TCNT2
|
|
out TCNT2, @0
|
|
.ENDMACRO
|
|
|
|
.MACRO Check_Eeprom_Ready
|
|
sbic EECR, EEWE
|
|
.ENDMACRO
|
|
.MACRO Set_Eeprom_Address
|
|
out EEARL, @0
|
|
out EEARH, @1
|
|
.ENDMACRO
|
|
.MACRO Start_Eeprom_Write
|
|
sbi EECR, EEMWE
|
|
sbi EECR, EEWE
|
|
.ENDMACRO
|
|
|
|
.MACRO Prepare_Lock_Or_Fuse_Read
|
|
ldi @0, ((1<<BLBSET)+(1<<SPMEN))
|
|
out SPMCR, @0
|
|
.ENDMACRO
|
|
|
|
.MACRO xcall
|
|
rcall @0
|
|
.ENDMACRO
|
|
|
|
.MACRO Set_RPM_Out
|
|
.ENDMACRO
|
|
.MACRO Clear_RPM_Out
|
|
.ENDMACRO
|